• Graphtec FC9000 Series Cutting Plotter
  • 13969577
1

Graphtec FC9000 Series Cutting Plotter

Whatsapp us

Features

Best in class ability

Graphtec Pen Holder

1485mm/s maximum cutting speed, 39.2m/s2 maximum acceleration, 5.88N (600gf) maximum cutting force. The FC9000 Series offers best in class productivity and abilities with a wider range of medias from thick to thin.

Reliable long-length tracking (Automatic Take-up Roller)
It supports long-length, 15m (50ft) (Operated with Graphtec specified media and conditions.) and makes possible to cut large signs/pops with stable paper carriage and high accurate cutting quality. In addition, if Automatic Take-up Roller as option is equipped to plotter, it becomes possible to automatically wind media and improve your work efficiency.

Graphtec Auto Take Up Roller

The media is detected by the ultrasonic sensor and rolled up automatically. Corresponding Models: FC9000-140/160・Guaranteed accuracy length: 20m(Under 1.2m per job)
・Maximum diameter of winding roll: φ180mm
* Winding conditions:
 - End face of roll media and end face of paper tube should be aligned.
 - Width of roll media should be the same as width of paper tube at winding side.
* It cannot be winded if media is folded or overlapped inside the basket.

Auto paneling

Graphtec Auto Paneling

To prevent skew of long-length cutting, this function makes possible to automatically split long-length jobs into smaller pages that are cut sequentially. It shortens feed length and enables stable cutting. It is useful for cutting with higher accuracy or beyond guaranteed long length.

Data output via USB flash memory without PC

Cutting Master Plug-in

When cutting data designed with Cutting Master 4 or Graphtec Pro Studio / Plus are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.
* The USB flash memory format only supports FAT32. Please note that NTFS and exFAT are not supported.

User-friendly control panel

Graphtec Front Panel

3.7inch LCD display and easy-to-use control panel supports 10 languages.

Improved ARMS for high precision cutting (ARMS 8.0)
The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency boosting features improve productivity for print & cut applications such as stickers and decals.

Data Link Function (Barcode Data Management/Continuous Cutting)
By reading the Graphtec original Barcode, FC9000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.
* The USB flash memory format only supports FAT32. Please note that NTFS and exFAT are not supported.
Data Link Graphtec

Continuous Cut (Data Link function)
Barcode data management allows cutting different data sequentially by detecting the "Start Mark" of the new Barcode. Sequential Print & Cut process with roll-media is now available.
Continuous Cut

Supports colored marks / specialty media
A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
* Sensor may not be able to read certain combinations of specialty media and colored marks.
Graphtec crop mark

Supports Adobe Illustrator "Crop Marks"
Using the plug-in software Cutting Master 4, Adobe Illustrator crop marks will be available.

illustrator cropmark

Expanded Cutting Area
The expanded cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.
Expanded cutting area

Segment Area Compensation (XY)
This function has been implemented in addition to the current X-axis Direction Segment Area Compensation. Middle mark is now available not only for X but also Y-axis alignment.
Segment Cutting

Specifications

ItemFC9000-75FC9000-100FC9000-140FC9000-160
ConfigurationGrit rolling type
Drive methodDigital servo drive
Max. cutting area (W x L) (*1)762mm × 50m1067mm × 50m1372mm × 50m1626mm × 50m
Cutting area of guaranteed accuracy (*1)742mm × 15m1047mm × 10m
762mm × 15m
1352mm × 10m
762mm × 15m
1607mm × 10m
762mm × 15m
Mountable media width (*2)Min. 50mm
Max. 920mm
(36.2 inch)
Max. 1224mm
(48.1 inch)
Max. 1529mm
(60.1 inch)
Max. 1850mm
(72.8 inch)
Mountable roll media diameter76 to 200mm (160mm when the optional paper ange (OPH-A21) is installed)
Mountable roll media mass12kg16kg20kg24kg
Compatible take-up roll width-200 to 1372mm200 to 1626mm
Compatible take-up roll mass-20kg
Maximum cross cut width762mm1067mm1372mm1626mm
Max. cutting speed1485mm/s at 45° direction
Axial accelerationMax. 39.2m/s2 at 45° direction
Cutting forceMax. 5.88N (600gf)
Minimum character sizeApprox. 5 mm alphanumeric (varies depending on character font and media)
Mechanical resolution0.005mm
Programmable resolutionGP-GL:0.1 / 0.05 / 0.025 / 0.01mm 
HP-GL™ (*3):0.025mm
Repeatability (*1)Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
Number of push rollers2 rollers3 rollers4 rollers (Max. 5 (option))
Mountable number of tools1 tool (mountable 2 tools (option))
Blade typesSupersteel
Pen typesOil-based ballpoint pen, Water-based fiber-tip pen
Media typesThickness 0.25mm or less Marking film (PVC film / fluorescence / reflective), Polyester film (on condition),
High Intensity reflective film (Diamond grade, Engineer grade) (*4)
DisplayGraphic type LCD with back-light (240dots × 128dots), supports 10 languages
InterfaceUSB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
Buffer memory2MB
Command setsGP-GL / HP-GL™ (Set by command or auto-detect) (*3)
Compatible OS (*5)Windows 10 (Home / Pro / Enterprise / Education)
Windows 8.1 (Windows 8.1 / Pro / Enterprise)
Mac OS X 10.6~10.11 / macOS 10.12 (Sierra) to11 (Big Sur)
Supported software
DOWNLOAD
Graphtec Pro Studio (*6), Graphtec Studio, Cutting Master 4 (*6), Windows Driver
Power source100 V to 240 V AC, 50 / 60 Hz
Power consumptionMax. 120 W
Operating environment10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (W × D × H)
* Includes stand and basket.
Approx.
1360x1151x1232 mm
Approx.
1665x1151x1232 mm
Approx.
1970x1151x1232 mm
Approx.
2224x1151x1232 mm
Weight (approx.)
* Includes stand and basket.
49 kg56 kg64.0 kg (80.9kg with installed automatic take-up roller)70.0 kg (88.5kg with installed automatic take-up roller)
SafetyPSE, UL/cUL, CE mark
EMCVCCI Class A, FCC Class A, CE mark
(*1)
Operated with Graphtec specified cutting condition and media. For long-length cutting, the basket is used.
(*2)
There are conditions for operability when setting media.
(*3)
HP-GLTM is a registered trademark of Hewlett-Packard Company.
(*4)
CB15UA/CB15UA-K30 blades and reinforced backing sheets are recommended for certain grades of high-intensity reflective film.
(*5)
Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
(*6)
It requires an Internet connection in order for activation or registration when starting the software for the rst time.

Standard accessories

ItemQ'tyDescription
Power cord1The type of cord is different by destination.
USB Cable12.9m long
Cutting blade holder1PHP33-CB09N-HS
Cutting Blade1CB09UB-1P
Loupe1PM-CT-001
Fiber-tip pen holder1PHP31-FIBER
Water-based Fiber-tip pen1KF700-BK (black)
Stand1 
Media Stocker1 
Basket1 
Flange set1OPH-A21 (only America)
DVD-ROM1User manual, Windows driver,
Graphtec Pro Studio (Windows, 1 license), Graphtec Studio (Mac), Cutting Master4
Printed document1SetupManual, Cutter Blade Manual and Safety Manual

Option

ItemPart No.Description
Automatic Take-up RollerOPH-A43For FC9000-140
OPH-A44For FC9000-160
Additional push roller kitOPH-A47For FC9000-140 or FC9000-160
2nd pen holderECK0013For dual tool configuration (dealer option)
FlangeOPH-A21Flange for media holding
Graphtec Pro Studio PlusOPS682-PLSDesign software including all advanced functions (1 license)
Graphtec Pro Studio Plus for RhinestoneOPS682-RSFLimited edition of rhinestone function only (1 license)
Graphtec Pro Studio Plus for Auto NestingOPS682-ANFLimited edition of auto nesting function only (1 license)

Dimensions

FC9000 Size

 FC9000-75FC9000-100FC9000-140FC9000-160
External dimensions (approx.)
【W×D1(D2)×H】
1360x1151(840)x1232 mm1665x1151(840)x1232 mm1970x1151(840)x1232 mm2224x1151(840)x1232 mm
*Includes stand and basket.

*Tolerance : +/- 5 mm

Download - Grahptec FC9600 Brochure