• Graphtec CE7000 Series Cutting Plotter
  • 34493708
  • Graphtec CE7000-130 Series Cutting Plotter
1

Graphtec CE7000 Series Cutting Plotter

Whatsapp us

Features

Enhanced performance
Max. cutting force 4.41N (450gf) and Max. cutting speed 1000mm/s

Graphtec CE7000 Cutting Force 450gf

With maximum cutting force 4.41N (450gf) and maximum cutting speed 1000 mm/s (*1), it enable to cut various media with high productivity.(*1) CE7000-130 / CE7000-160

Cutting performance that guaranties accurate 5m length cutting. (*2)
The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating.
In addition, by using an optional special basket, stability in long cuts can be achieved.
(*2) In case that using optional baskets of CE7000-60/130/160 and cutting media and conditions specified by Graphtec.
Graphtec Cutting Plotter Features

Data output via USB flash memory without PC

Grahptec Data Output USB

When cutting data designed with Cutting Master 4 or Graphtec Pro Studio / Plus are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.
* The USB memory format only supports FAT32. Please note that NTFS and exFAT are not supported.

Perforation cutting ability

Graphtec perforation cutting

Carrier Sheet Table

Carrier Sheet Table

It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.* Available with CE7000-40 / -60.* In case that using carrier sheet “CR09300-A3”, Please use together with carrier sheet table "OPH-A45".

User-friendly control panel

Graphtec user control panel

3.7 inch LCD display andeasy-to-use control panel supports 10 languages.

Data Link Function (Barcode Data Management/Continuous Cutting)
By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.
* The USB flash memory format only supports FAT32. Please note that NTFS and exFAT are not supported.
Graphtec Continuous Cutting

Continuous Cut (Data Link function)
Barcode data management allows cutting different data sequentially by detecting the "Start Mark" of the new Barcode. Sequential Print & Cut process with roll-media is now available.
Graphtec Continuous Cut

Supports colored marks / specialty media
A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
* Sensor may not be able to read certain combinations of specialty media and colored marks.
* This photo is an image of FC9000.
Graphtec crop marks reading

Supports Adobe Illustrator "Crop Marks"
Using the plug-in software Cutting Master 4, Adobe Illustrator crop marks will be availble.

Crop marks from illustrator

Expanded Cutting Area
The expanded cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.
Expanded cutting area


Specifications

Item
CE7000-40
CE7000-60
CE7000-130
CE7000-160
(Not available in US & Korea)
Configuration
Grit rolling type
Drive method
Digital servo drive
Max. cutting area (W x L) (*1)
375mm × 50m
603mm × 50m
1270mm × 50m
1524mm × 50m
Cutting area of guaranteed accuracy (*1)
(When using optional basket)
355mm × 2m
583mm × 2m
(583mm × 5m)
1250mm × 2m
(1250mm × 5m)
1504mm × 2m
(1504mm × 5m)
Mountable media width
Min.
50mm
Max.
484mm (19inch)
712mm (28inch)
1372mm (54inch)
1626mm (64inch)
Mountable roll media mass
5 kg
9 kg
17 kg
20 kg
Number of push rollers
2 rollers
4 rollers (Max. 5 (option))
Max. cutting speed
600mm/s
at all direction
900mm/s
at 45° direction
1000mm/s at 45° direction
Acceleration
21.2m/s2 at 45° direction
13.9m/s2 at 45° direction
Cutting force
Max. 4.41N (450gf)
Minimum character size
Approx. 5 mm alphanumeric (varies depending on character font and media)
Mechanical resolution
0.005mm
Programmable resolution
GP-GL:0.1/0.05/0.025/0.01mm HP-GL™ (*2):0.025mm
Repeatability (*1)
Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
Mountable number of tools
1 tool
Blade types
Supersteel
Pen types
Oil-based ballpoint pen, Water-based fiber-tip pen
Media types
Up to 0.25mm thickness
Marking film (PVC / fluorescence / reflection),  polyester film (With specified conditions)
Interface
USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
Buffer memory
2MB
Command sets
GP-GL / HP-GL™ (Set by command or auto-detect) (*2)
Display
Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
Power source
100V to 240V AC, 200V to 240V AC, 50 / 60 Hz
Power consumption
Up to 100W
Operating environment
10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment
16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (approx. W x D x H)
(with basket)
772x292x313 mm
1005×582×1092 mm
(1005×936×1092 mm)(*3)
1704×811×1215 mm
(1704×1148×1215 mm)(*3)
1916×811×1215 mm
(1916×1148×1215 mm)(*3)
Weight (approx.)
(with basket)
13kg
23kg
(25.2kg)(*3)
51kg
(54.9kg)(*3)
55kg
(59.5kg)(*3)
Compatible OS (*4)
Windows 10 / 8.1
Mac OS X 10.6 ~ 10.11 / macOS 10.12 ~ 10.15 (Graphtec Studio: 10.6 - 10.15, Cutting Master 4: 10.7 - 10.15)
Supported software
Graphtec Pro Studio(Windows)(*5), Graphtec Studio(Mac), Cutting Master 4(*5), Windows Driver

(*1)Operated with Graphtec specified cutting condition and media. For long-length cutting, the basket is used.

(*2)HP-GLTM is a registered trademark of Hewlett-Packard Company.

(*3)When equipped with the stand.

(*4)Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.

(*5)It requires an Internet connection in order for activation or registration when starting the software for the first time.


Standard accessories

Item
Q'ty
Description
Power cord
1
The type of cord is different by destination.
USB Cable
1
2.9m long
Cutting blade holder
1
PHP33-CB09N-HS
Cutting Blade
1
CB09UB-1P
Loupe
1
PM-CT-001
Fiber-tip pen holder
1
PHP31-FIBER
Water-based Fiber-tip pen
1
KF700-BK (black)
Roll Media Tray
1
Standard accessory for CE7000-40/-60 (* Only for CE7000-40 in Japan and US)
Stand for CE7000
1
Standard accessory for 130 / 160
DVD-ROM
1
User manual, Windows driver,
Graphtec Pro Studio (Windows, 1 license), Graphtec Studio (Mac), Cutting Master4
Printed document
1
SetupManual, Cutter Blade Manual and Safety Manual

Option

Item
Part No.
Description
Basket for CE7000 series
PG0103
For CE7000-60
PG0104
For CE7000-130
PG0105
For CE7000-160
Carrier sheet table
OPH-A45
For CE7000-40 or CE7000-60
Additional push roller kit
OPH-A49
Only for CE7000-130/CE7000-160
Optional Stand
ST0118
For CE7000-60
Graphtec Pro Studio Plus
OPS682-PLS
Design software including all advanced functions (1 license)
Graphtec Pro Studio Plus for Rhinestone
OPS682-RSF
Limited edition of rhinestone function only (1 license)
Graphtec Pro Studio Plus for Auto Nesting
OPS682-ANF
Limited edition of auto nesting function only (1 license)

Dimensions

CE7000-40

Graphtec CE7000-40 Size

CE7000-60

Graphtec CE7000-60 Size

CE7000-130 / 160

Graphtec CE7000-130 Size



Download - Grahptec CE7000 Brochure