Graphtec CE7000 Series Cutting Plotter


Enhanced performance

Max. cutting force 4.41N (450gf) and Max. cutting speed 1000mm/s


With maximum cutting force 4.41N (450gf) and maximum cutting speed 1000 mm/s (*1), it enable to cut various media with high productivity.(*1) CE7000-130 / CE7000-160

Cutting performance that guaranties accurate 5m length cutting. (*2)

The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating.
In addition, by using an optional special basket, stability in long cuts can be achieved.
(*2) In case that using optional baskets of CE7000-60/130/160 and cutting media and conditions specified by Graphtec.

Data output via USB flash memory without PC


When cutting data designed with Cutting Master 4 or Graphtec Pro Studio / Plus are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.
* The USB memory format only supports FAT32. Please note that NTFS and exFAT are not supported.

Perforation cutting ability

Carrier Sheet Table

It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.* Available with CE7000-40 / -60.* In case that using carrier sheet “CR09300-A3”, Please use together with carrier sheet table "OPH-A45".

User-friendly control panel


3.7 inch LCD display andeasy-to-use control panel supports 10 languages.

Data Link Function (Barcode Data Management/Continuous Cutting)

By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.
* The USB flash memory format only supports FAT32. Please note that NTFS and exFAT are not supported.

Continuous Cut (Data Link function)

Barcode data management allows cutting different data sequentially by detecting the "Start Mark" of the new Barcode. Sequential Print & Cut process with roll-media is now available.

Supports colored marks / specialty media

A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
* Sensor may not be able to read certain combinations of specialty media and colored marks.
* This photo is an image of FC9000.

Supports Adobe Illustrator "Crop Marks"

Using the plug-in software Cutting Master 4, Adobe Illustrator crop marks will be availble.

Expanded Cutting Area

The expanded cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.


(Not available in US & Korea)
ConfigurationGrit rolling type
Drive methodDigital servo drive
Max. cutting area (W x L) (*1)375mm × 50m603mm × 50m1270mm × 50m1524mm × 50m
Cutting area of guaranteed accuracy (*1)
(When using optional basket)
355mm × 2m583mm × 2m
(583mm × 5m)
1250mm × 2m
(1250mm × 5m)
1504mm × 2m
(1504mm × 5m)
Mountable media widthMin.50mm
Max.484mm (19inch)712mm (28inch)1372mm (54inch)1626mm (64inch)
Mountable roll media mass5 kg9 kg17 kg20 kg
Number of push rollers2 rollers4 rollers (Max. 5 (option))
Max. cutting speed600mm/s
at all direction
at 45° direction
1000mm/s at 45° direction
Acceleration21.2m/s2 at 45° direction13.9m/s2 at 45° direction
Cutting forceMax. 4.41N (450gf)
Minimum character sizeApprox. 5 mm alphanumeric (varies depending on character font and media)
Mechanical resolution0.005mm
Programmable resolutionGP-GL:0.1/0.05/0.025/0.01mm HP-GL™ (*2):0.025mm
Repeatability (*1)Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
Mountable number of tools1 tool
Blade typesSupersteel
Pen typesOil-based ballpoint pen, Water-based fiber-tip pen
Media typesUp to 0.25mm thickness
Marking film (PVC / fluorescence / reflection),  polyester film (With specified conditions)
InterfaceUSB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
Buffer memory2MB
Command setsGP-GL / HP-GL™ (Set by command or auto-detect) (*2)
DisplayGraphic type LCD with back-light (240dots x 128dots), supports 10 languages
Power source100V to 240V AC, 200V to 240V AC, 50 / 60 Hz
Power consumptionUp to 100W
Operating environment10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (approx. W x D x H)
(with basket)
772x292x313 mm1005×582×1092 mm
(1005×936×1092 mm)(*3)
1704×811×1215 mm
(1704×1148×1215 mm)(*3)
1916×811×1215 mm
(1916×1148×1215 mm)(*3)
Weight (approx.)
(with basket)
Compatible OS (*4)Windows 10 / 8.1
Mac OS X 10.6 ~ 10.11 / macOS 10.12 ~ 10.15 (Graphtec Studio: 10.6 - 10.15, Cutting Master 4: 10.7 - 10.15)
Supported software
Graphtec Pro Studio(Windows)(*5), Graphtec Studio(Mac), Cutting Master 4(*5), Windows Driver
Operated with Graphtec specified cutting condition and media. For long-length cutting, the basket is used.
HP-GLTM is a registered trademark of Hewlett-Packard Company.
When equipped with the stand.
Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
It requires an Internet connection in order for activation or registration when starting the software for the first time.

Standard accessories

Power cord1The type of cord is different by destination.
USB Cable12.9m long
Cutting blade holder1PHP33-CB09N-HS
Cutting Blade1CB09UB-1P
Fiber-tip pen holder1PHP31-FIBER
Water-based Fiber-tip pen1KF700-BK (black)
Roll Media Tray1Standard accessory for CE7000-40/-60 (* Only for CE7000-40 in Japan and US)
Stand for CE70001Standard accessory for 130 / 160
DVD-ROM1User manual, Windows driver,
Graphtec Pro Studio (Windows, 1 license), Graphtec Studio (Mac), Cutting Master4
Printed document1SetupManual, Cutter Blade Manual and Safety Manual


ItemPart No.Description
Basket for CE7000 seriesPG0103For CE7000-60
PG0104For CE7000-130
PG0105For CE7000-160
Carrier sheet tableOPH-A45For CE7000-40 or CE7000-60
Additional push roller kitOPH-A49Only for CE7000-130/CE7000-160
Optional StandST0118For CE7000-60
Graphtec Pro Studio PlusOPS682-PLSDesign software including all advanced functions (1 license)
Graphtec Pro Studio Plus for RhinestoneOPS682-RSFLimited edition of rhinestone function only (1 license)
Graphtec Pro Studio Plus for Auto NestingOPS682-ANFLimited edition of auto nesting function only (1 license)




CE7000-130 / 160

Download - Grahptec CE7000 Brochure

Your cart is currently empty.
Continue shopping