Graphtec F-Mark 2 Auto Feed Set with Cutter



Main Features

  1. Continuous, hands-free sheet media loading and processing
  2. Dedicated software ensure accurate alignment of contours and printed images
  3. Camera quickly detects 2-point reference marks for alignment
  4. Performs half cutting, perforation cutting as die cutting and dashed line cutting

Increases production efficiency by automatic reloading

The auto sheet feeder reloads the media to the cutting plotter automatically. The cutting process is executed repeatedly with replacing the media. It enables to significantly improve productivity in cutting a large number of media with the same patterns. The following steps are automatically repeated continuity until specified number of copies are made.

Applications

It is suitable for post-processing of the printed media created with the print-on-demand in small production runs for producing various products such as labels, heat transfer sheets for custom apparel and the POP as table advertising.

Components of the system

*The cutting plotter (CE7000-40) is not included in the system. The F-MARK2 is a product of ATS Digital * F-MARK2 works only with the dedicated software.
* Function of the CE7000-40 will be limited when the dedicated software is used.

Auto Sheet Feeder Unit

An arm with air suction cups lifts the media from the supply tray and places it into the cutter. Suction force is improved 30% from previous model because of enhancing air suction cups. It is able to place the sheet media including Super A3 to A4 and its equivalent in the supply tray. It is able to stack up to 200 sheets of media or up to 35 mm high on the media supply tray.* Number of sheet varies by the material, thickness and condition of media.
* The cutting plotter is not included in the system.

Camera

Quickly detects 2-point reference marks for aligning the contour & printed images by the camera that is mounted on the top cover of the cutting plotter.

Exit tray

After cutting is completed, sheets are ejected in the tray.* It may not be able to catch many quantity of sheets. It varies by the material, thickness and condition of media. It is required to periodically remove sheets from the tray.

Digital Cutting Software (for Windows)

Dedicated software controls the auto sheet feeding system and transfers contour cutting data to the plotter.The system includes dedicated application software. After media is loaded, the attached camera quickly detects 2-point reference marks and corrects alignment before contour cutting data is transferred, giving you the perfect cut every time. The software configures cutting conditions such as number of copies, cutting force, cutting speed, offset, and number of paths, and it can import Adobe Illustrator or CorelDRAW EPS files as the contour data.* Designs created with any version of Illustrator or CorelDRAW need to be saved or exported in the specified format.

Specifications

ItemPart NO.
Auto Sheet Feeder UnitF-MARK2
UnitItemDescription
Whole system
(Auto sheet feeder unit with cutter unit)
Supported standard sized mediaA4 (297 x 210 mm), SRA4 (320 x 235 mm) (It is loaded with landscape orientation.)
A3 (297 x 420 mm), A3+ (typical 329 x 483 mm), SRA3 (320 x 450 mm)
(Loading is in portrait orientation.)
Interface to PCSingle port of USB (The USB hub to connect the auto feeder unit and cutter unit is included.)
Power source100 to 240 V AC (It is required three power outlet.)
Operating environmentTemperature: 10 to 35°C
Humidity: 35 to 75 % RH (non-condensing)
DimensionsWhen the entire system is placed on the table
- Size of the upper part from the table:
   Approx. 772 (W) x 820 (D) x 313 (H) mm
- Size of the lower part from the table:
   Approx. 772 (W) x 380 (D) x 420 (H) mm
* The CE7000-40 is placed to edge of table. Refer the illustration of Dimensions.
WeightApprox. 27 kg
(Cutter unit (*1) : 13 kg, Auto feeder unit: 10 kg, Exit tray: 4kg)
Auto sheet feeder unit
(F-MARK2)
Supported mediaWidth: 279 to 370 mm, Length: 210 to 500 mm
(up to 700 mm when the option EXTENDER is installed.)
Up to 350 g/m2
(It is the grammage of the media that can be handled by the automatic feeder unit.)
Capacity of supply tray200 Sheets or up to 35mm height
(It varies by the material, thickness and condition of media.)
InterfaceUSB 2.0
Power sourceAC adapter, 100 to 240 V AC, Approx. 60 VA at output power
Compatible StandardsMain body : cNus(UL / cUL), CE mark, FCC
AC adapter : UL, cUL, CE mark, FCC, PSE, CCC
Digital Cutting SoftwareSupported OSWindows 10 / 8.1
Contour cutting data formatai (Illustrator version 8) and CorelDRAW eps
(The contour cutting data file contains only the contour cutting objects and reference marks and is saved in the specified format.)
Cutter unit
(CE7000-40) (*1)
Cutting speedMax. 600 mm/s all directions
AccelerationMax. 21.2 m/s2 (2.2 G) at 45° direction
Cutting forceMax. 4.41 N (450 gf) with CE7000-40
InterfaceUSB 2.0(Full Speed)
Power source100 to 240 V AC
Power consumptionUp to 100W
Compatible StandardsUL, cUL, CE mark, RoHS Directive

* F-MARK2 works only with the dedicated software.
* Function of the CE7000-40 will be limited when the dedicated software is used.

*1
The cutting plotter (CE7000-40) is not included in the system. The F-MARK is a product of ATS Digital S.r.l.

Standard accessories

Suction cups

ItemQ'tyItemQ'ty
Auto sheet feeder unit F-MARK21Exit tray1
Stopper1Self adhesive cable clip2
Suction cups (for replacement)2Camera set1
Allen wrench (2mm)1Calibration sheet1
Alignment label1USB Hub1
AC power adapter1USB cable (1m)1
User manual and software (CD)1Test sheet12
Safety quick guide1Tail Tool1

Options

ItemModel No./Part No.Description
Extended bracket of rear media guide
(EXTENDER)
U797000028Bracket to support long media up to 700 mm

Dimensions

F-MARK2

F-MARK2 and CE7000-40

3D View

*
Scale : mm, Tolerance : +/- 5 mm

Download: Graphtec F-Mark 2 Brochure

Your Cart

Your cart is currently empty.

Continue browsing here.